Trousers

A selection of London Lounge articles
alden
Posts: 8216
Joined: Tue Jan 18, 2005 11:58 am
Contact:

Wed Jan 17, 2018 3:29 pm

Frank,

Something just occurred to me. Could you, or rather, would you be willing to draft patterns based on supplied measures for LL members, so that they could take the pattern to their trouser makers? Would that work?

Cheers
old henry
Posts: 969
Joined: Sat Jan 16, 2010 12:34 pm
Location: Clayton New York
Contact:

Wed Jan 17, 2018 3:33 pm

I absolutely could. In fact I have done so.
alden
Posts: 8216
Joined: Tue Jan 18, 2005 11:58 am
Contact:

Wed Jan 17, 2018 3:35 pm

That would be an amazing help.

What measures do you need and how should they be taken?
old henry
Posts: 969
Joined: Sat Jan 16, 2010 12:34 pm
Location: Clayton New York
Contact:

Wed Jan 17, 2018 3:41 pm

I would need photographs. Of front. Side. Back.
Measurements of Waist and Seat.
And measure if Inseam - Out seam of pant in photo.
Desired cuff.
I also do this with coat patterns.
I make coat pattern using The Mitchell Syatem for guys to give to their tailors. But it is just a customized block. The tailor has to know how to tweak it.
alden
Posts: 8216
Joined: Tue Jan 18, 2005 11:58 am
Contact:

Wed Jan 17, 2018 4:57 pm

I think having these patterns would be a great advantage. I have two shirt patterns from my Master shirtmaker that I carry with me when I get shirts. The makers know exactly what I want. It's right there on paper. No words to be confused or misunderstandings possible.

Cheers
HristoStefanov
Posts: 145
Joined: Tue Jul 22, 2014 9:38 am
Contact:

Wed Jan 17, 2018 10:15 pm

old henry wrote:Yes Michael. You can see the center illustration is dressed left. Also in the sean Connery photo just above he is dressed left. A very important thing to know is that trousers that fit nicely in the crotch act like a high armhole. Freedom of movement. If the crotch hangs too low it restricts movement. Like a low armhole. It pulls the whole leg. This is why tailors used to "Dress" your trouser to one side. When you sit or walk your nuts nestle comfortably to one side into the added cloth. And it also keeps the pleats happy. Take a bit off one side and add to the other to pull the crotch of the pant to one Side or the other depending to which side your nuts hang. So that when you move.. the crotch seam will go comfortably up the side of your nuts. Think high armhole. All tailors used to ask,"to which side do you dress,Sir ?"
ps. The draft for the photo above is in The Blue Book.
Very interesting idea. I have never thought about it. This would also elongate the legs.
old henry
Posts: 969
Joined: Sat Jan 16, 2010 12:34 pm
Location: Clayton New York
Contact:

Wed Jan 17, 2018 11:45 pm

I never thought of that but yes it would. But make sure your tailor knows how to do it or it will have the opposite effect. Although I'm sure he knows.
alden
Posts: 8216
Joined: Tue Jan 18, 2005 11:58 am
Contact:

Fri Jan 19, 2018 1:00 pm

Although I'm sure he knows.
I am not at all sure of this Frank. Every tailor I have ever known knew to ask which side I dressed and made the appropriate adjustments to the pattern.

But here we have young clients who are stunned by the concept who have clearly never been asked. And they are going to SR tailors. So they are just getting a stock MTM pattern trouser and that's it! And that's exactly what it looks like.

Cheers
old henry
Posts: 969
Joined: Sat Jan 16, 2010 12:34 pm
Location: Clayton New York
Contact:

Fri Jan 19, 2018 10:24 pm

Happy trouser. And in the above question..I brought you "dress" because of the skinny pants I saw on here. With more roomy pants it is not as necessary. But I still do a bit to the left.
BESPOKE62
Posts: 41
Joined: Thu Jan 20, 2011 5:40 am
Contact:

Fri Jan 19, 2018 10:37 pm

alden wrote:
Although I'm sure he knows.
I am not at all sure of this Frank. Every tailor I have ever known knew to ask which side I dressed and made the appropriate adjustments to the pattern.

But here we have young clients who are stunned by the concept who have clearly never been asked. And they are going to SR tailors. So they are just getting a stock MTM pattern trouser and that's it! And that's exactly what it looks like.

Cheers
I worked with the this old school tailor and he asked all new clients that questions, and was quite dismayed when most had no idea what he was talking about. It is the little things, which may seem insignificant, that make all the differences in the world. At times it seems we are obsessed with the wrong things, it is the minutiae or trifles; that we often overlook, disregard and do believe matter; that make all the differences. As my tailor taught me, there is a quarter of an inch between good and perfection, in other words, the small things matter. So, now we have “high priced” tailors, who do not ask the simple question, “which side do you dress” or don’t know to ask or worst yet, they know but do not care and figure most customer won't know the differences anyway.
couch
Posts: 1291
Joined: Tue Jul 19, 2005 12:47 am
Contact:

Fri Jan 19, 2018 11:54 pm

To be fair, it's also true that some young men prefer briefs to boxers and the question doesn't have the same significance (or familiarity).
old henry
Posts: 969
Joined: Sat Jan 16, 2010 12:34 pm
Location: Clayton New York
Contact:

Sat Jan 20, 2018 1:11 am

Along with briefs they are also wearing fitted (tight) pants. Which is why I brought it up.
ismailalmurtadza
Posts: 143
Joined: Sat Nov 28, 2009 8:35 am
Contact:

Sat Jan 20, 2018 1:49 pm

Old Henry
Does it work the same with the forward pleats/reverse pleats

Nik
old henry
Posts: 969
Joined: Sat Jan 16, 2010 12:34 pm
Location: Clayton New York
Contact:

Sat Jan 20, 2018 2:06 pm

Yes it does.
Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 0 guests