Buttonholes on traditional bespoke
I am surprised by the lack of response to this post. A properly sewn buttonhole is a thing of beauty and usually only found on bespoke, I once watched a tailoress sew a buttonhole on a jacket, she was extremely skilled and fast but it seemed to me to be a complicated procedure! When you see the work that goes into a properly tailored garment the price often becomes very reasonable.
I cannot remember where I heard it but I was told that craftsmanship is about taking care over details.
I cannot remember where I heard it but I was told that craftsmanship is about taking care over details.
I guess this is just a case of one picture worthing a thousand words... and definitely worthing more than a thousand one-word replies with "great", "super", "subscribed", etc. Fortunately, they are not en vogue on this non-vogue forum!
Andrey
Andrey
Perhaps the silence is the (non) sound of jaws dropping, and all the members who have recently defended the quality of London shirt making eating their words!
I write this wearing an industrially produced MTM shirt by Simone Abbarchi, and I feel green with envy when I look at the hand-stitched button hole.
I write this wearing an industrially produced MTM shirt by Simone Abbarchi, and I feel green with envy when I look at the hand-stitched button hole.
I don't feel the need to eat my words at all. The quality achieved by some London shirtmakers is very good. But this is in a different league and I am delighted to admit it, and to see such craftsmanship still in existence. Is the disctinction between "traditional bespoke" and merely "bespoke" useful in addressing the difference in expectation and outcome? I think it might be.and all the members who have recently defended the quality of London shirt making eating their words!
-
- Posts: 344
- Joined: Mon Mar 08, 2010 9:33 am
- Contact:
To me there is not other response than to cherish that rare feeling of being confronted with something of such aesthetic supremacy.
... And, obviously, to be pleased with the fact that I will be spending the entire fall in Paris and thus hopefully increase the occurrence of such confrontations
... And, obviously, to be pleased with the fact that I will be spending the entire fall in Paris and thus hopefully increase the occurrence of such confrontations
And here's some buttonholes made by a shirtmaker in Bangkok (sic!). Unfused collar and cuffs and thick MoP buttons...
-
- Posts: 64
- Joined: Fri Feb 23, 2007 4:31 pm
- Contact:
I had a shirtmaker in Rome who used the same type of thick m-o-p buttons. It's always a pleasure to contemplate their rich, buttery yellow sheen and substantial format. Just this morning, as I put one of his shirts on, I was making a mental note to salvage those buttons once the shirts themselves are no longer wearable.
I'm guessing it's Mary Frittolini, who trained under Pierre Duboin, the former head cutter at Lanvin Paris.
No more guessing here. That´s definitely the hand of Mary Frittolini (present -if not in the direct making of the buttonholes- for sure on the photograph holding the shirt)
Oh, come on guys....... well, at least hsw9001 was more subtle.
Oh, come on guys....... well, at least hsw9001 was more subtle.
Does anyone know if Mary travels to NA, and if so where abouts? Also, does she speak English?
Thanks in advance.
Thanks in advance.
-
- Posts: 344
- Joined: Mon Mar 08, 2010 9:33 am
- Contact:
From corresponding with her, I have the impression that her English is excellent, although she claims to be a novice. She travels to Paris.
-
- Posts: 143
- Joined: Sat Nov 28, 2009 8:35 am
- Contact:
J.S. Groot wrote:From corresponding with her, I have the impression that her English is excellent, although she claims to be a novice. She travels to Paris.
...but her website is in Italian.
murtadza
My shirts have at least 16 buttonholes so you can imagine the time in handwork involved.
And yes, this is a classic example of traditional bespoke at its finest. And yes, this clearly differentiates real craftsmanship from industrially produced CAD CAM MTM products made entirely by machine. They really are not the same products. And all the wanting to believe they are will not change the truth.
Cheers
Michael
And yes, this is a classic example of traditional bespoke at its finest. And yes, this clearly differentiates real craftsmanship from industrially produced CAD CAM MTM products made entirely by machine. They really are not the same products. And all the wanting to believe they are will not change the truth.
Cheers
Michael
-
- Information
-
Who is online
Users browsing this forum: Bing [Bot] and 1 guest