Cufflink question

"The brute covers himself, the rich man and the fop adorn themselves, the elegant man dresses!"

-Honore de Balzac

Post Reply
Prince Barry
Posts: 49
Joined: Sat Dec 31, 2005 4:07 pm
Location: Nr Leeds, UK
Contact:

Sat Jan 21, 2006 1:05 pm

I did a subject search for this and couldn't find any threads that answered my question, so I apologise if it has been asked before.

I have just bought myself some double cuff shirts today and a pair of gold cufflinks, the proper type with the chain, not the bar.

My question is, is there an easy way of inserting the cufflinks into the cuffs apart from getting somebody else to do it for you? It took me quite a while just to get one in and I felt like having a lie down afterwards..ha ha!
TVD
Posts: 470
Joined: Tue Jul 19, 2005 6:56 pm
Contact:

Sat Jan 21, 2006 4:58 pm

Practice!

Before dressing, fold cuffs and pull cufflinks through the two outer layers of cuff. Then put on shirt. Insert middle and index finger between the "loose" inner cufflink end and the outer two layers of cuff through which the chain has already been pulled. One finger left and one right of the chain. Use index finger and thumb to angle this inner cufflink and insert it through the tow inner layers of cuff.

It is possible to do this with left and right hand, after some practice.

Trying to do this drunk or hung-over will result in disappointment.
Prince Barry
Posts: 49
Joined: Sat Dec 31, 2005 4:07 pm
Location: Nr Leeds, UK
Contact:

Sat Jan 21, 2006 6:27 pm

Thank you TVD. I will print out your reply and have it in front of me when I am practicing. I could have gone the easy way and just bought some of the 'bar' type but I don't feel that they are quite as 'gentlemanly'.
Costi
Posts: 2963
Joined: Tue Dec 20, 2005 6:29 pm
Location: Switzerland
Contact:

Thu Feb 09, 2006 7:45 pm

Actually, Barry, I find that chain cufflinks always add a bit to the overall circumference of the cuff which, unless the sleeve is cut to the exact length of the arm (which I am not a big fan of, preferring a more "puffed" sleeve to prevent the shirt cuff from sliding beneath the coat sleeve when bending the elbow), will result in the the cuff sliding just that extra centimeter lower on the wrist that spoils the whole look of the coat sleeve - shirt cuff - hand ensamble. I have relatively few chain cufflinks for this very reason, and I only wear them with certain shirts that have just slightly tighter cuffs and can take the extra length of the chain. Shortening the chain is one solution (which I did apply on a couple of pairs of cufflinks, taking them to a jewller's) but there is a limit which, if crossed, makes the cufflinks unusable.
edhayes
Posts: 185
Joined: Tue Feb 08, 2005 10:18 pm
Contact:

Fri Feb 10, 2006 2:44 am

I have never been able to put on cuffl links with the shirt on in my life
RWS
Posts: 1166
Joined: Sat Jan 29, 2005 12:53 am
Location: New England
Contact:

Fri Feb 10, 2006 1:57 pm

Ed, Tom Drastik's instructions are precisely what I follow, usually successfully. Of course, the difficulty of doing this every time without frustration is another (if minor!) reason to marry.
Concordia
Posts: 2635
Joined: Mon Feb 07, 2005 3:58 am
Contact:

Fri Feb 10, 2006 2:28 pm

I put the shirt on before inserting the first oval through the inner two buttonholes. From there, it's a pretty easy thing to push it on through the outer ones.

Of course, I had years of violin lessons before I learned this technique.
Prince Barry
Posts: 49
Joined: Sat Dec 31, 2005 4:07 pm
Location: Nr Leeds, UK
Contact:

Sat Feb 11, 2006 6:47 pm

Thank you Gents for your replies. I actually found that because my wrists are quite slim, I can put them in first and then put on the shirt. That was after I had just about mastered the art of inserting them whilst wearing the shirt.
Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 5 guests