Double Breasted stripe widths?

"The brute covers himself, the rich man and the fop adorn themselves, the elegant man dresses!"

-Honore de Balzac

Rowly
Posts: 541
Joined: Thu Feb 26, 2009 2:42 pm
Contact:

Mon Jul 12, 2010 2:45 pm

Hi, Is a 1/2'' stripe too narrow for a double breasted suit? Are there too many repeats in the pattern? I found a grey double pin in Lessers 11/12 oz book, which reminded me of a similar one I saw in Anderson and Shep's window about six months ago. I also saw a youtube clip of Simon Cundy wearing what resembles a grey 1/2'' rope stripe from Lesser's 13oz book. I may be wrong, of course, ... but it made me wonder is there an ideal stripe width for DB?.... In SB, I find a 5/8'' stripe to be a nice proportion.Thanks for any opinions, Rowly.
DD MacDonald
Posts: 383
Joined: Mon Sep 19, 2005 1:51 pm
Contact:

Mon Jul 12, 2010 4:32 pm

Rowly, I find that stripe width between I/2 and 1 inch works very well for DBs. Anything wider and I feel like its a "chicago stripe" and I've never been a fan of tight stripes - pin, chalk or otherwise. If I were looking, I'd focus on the 5/8-3/4 inch range (between the stripes).

DDM
Jordan Marc
Posts: 324
Joined: Fri Aug 08, 2008 12:59 pm
Contact:

Mon Jul 12, 2010 5:16 pm

Rowly:

If you're keen on matching the stripes along the lapels of your coat with their counterparts on the collar,
a chalk or rope stripe with 5/8-inch spacing is fairly easy to achieve and looks best on a single-breasted
suit. On a double-breasted suit, 5/8-inch spacing can appear a bit busy.

On the other hand, a double-breasted suit looks better with a wider-spaced stripe which can range from
3/4-inch to 1 1/4-inch spacing. The wider the spacing, the less likely it is to match the stripes on the
lapels and collar. Ideally, you want some of each style in different cloths in your wardrobe.

By the way, wider stripes were more prevalent in the 1930s and often associated with well-dressed gangsters. Why? Because mobsters had oodles of money and could afford tailors, while the average working stiff had next to nothing during the Depression.

JMB
cdo
Posts: 41
Joined: Sun Oct 22, 2006 5:55 pm
Contact:

Mon Jul 12, 2010 10:51 pm

Rowly

Your post have framed a similar question that I thought about recently. I was considering getting Anderson's triple pin grey worsted made up as a single breasted suit but decided that the width between the pins (around 1 1/8 inch?) were too generous for (IMHO) the trimmer style of a single breasted coat. I know exactly the Lesser's 11-12oz double pin cloth you are referring to (# 30882); I like it very much but thought it would make up nicely as a single breasted suit rather than a double breasted coat for the same reason that Jordan Marc articulated in his post. If you are interested in looking at other charcoal double pin cloths, take a glance at Dugdale's Classics 13-14oz book # 9419. I seem to remember the pins being more widely spaced and they are solid lines as opposed to being broken pins as in Lesser's case. Or the Thomas Fisher super 100 book containing a 11oz charcoal triple broken pinstripe # F1831 (1'' spacing).

- C
storeynicholas

Mon Jul 12, 2010 11:52 pm

"Bankers' stripes" = wide chalkstripes in the UK - JMB - aren't stiffs, traditionally, rather hard pushed to work and catered for in concrete in Chicago? :D Pattered to suit, maybe... :twisted:
NJS
Jordan Marc
Posts: 324
Joined: Fri Aug 08, 2008 12:59 pm
Contact:

Tue Jul 13, 2010 3:17 pm

Nicholas:

Oh, there's a cryptic response! I used the term 'working stiff' not to denegrate but as a 1930s metaphor for gangsters with deep pockets who could afford tailors versus the average man who could barely make ends meet during the height of the Depression. Further, if 'concrete in Chicago' is a reference to getting rid of someone by fitting him with a pair of concrete boots before dropping him in the river, that's more movie mythology than reality. Chicagoans are proud of their lakefront and rivers. Alleys and railyards were more
apt to be the killing grounds.

JMB
Rowly
Posts: 541
Joined: Thu Feb 26, 2009 2:42 pm
Contact:

Thu Jul 15, 2010 12:45 pm

DD MacDonald wrote:If I were looking, I'd focus on the 5/8-3/4 inch range (between the stripes).
This is usually my feeling also , however, I really liked these cloths ( Lesser's 30882, and 13oz 29720)... I thought they were quite striking and might look good as db. I agree about not going too wide but wasn't sure about going narrower. I certaintly don't want to talk myself into another misfire. On the wide side, ... there is a lovely rich sporty blue flannel by Harrisons that I admire, and although probably intended for a very large chest.. I am tempted to have it in a sb.., as a jazzy fun suit..( Harrison 39190 ) ... How frustrating it is to find the ideal cloth, but the stripe to be on the wide side? Maybe I should, '' take a walk on the wide side " and broaden my perspective and not be too narrow with my options? .... thanks for all advice, which is helpful as always.... Rowly.
couch
Posts: 1291
Joined: Tue Jul 19, 2005 12:47 am
Contact:

Thu Jul 15, 2010 11:02 pm

I wonder to what degree the sharpness and contrast of the stripe might affect how the widths play. I suspect a very subtle chalk stripe might be easier to wear successfully at a wider spacing than a crisper and higher-contrast pattern would. You might experiment with this if you have a chance to look at bolts; see what you think.
jgmounts
Posts: 16
Joined: Sat Feb 27, 2010 6:02 pm

Sat Jul 17, 2010 11:23 pm

For those who are tall and slender a broad spacing seems best to my eye. Perhaps 7/8 " to 1 1/8 " would be ideal.
yachtie
Posts: 349
Joined: Fri May 12, 2006 6:42 pm
Contact:

Tue Aug 17, 2010 4:30 pm

There is no "right" answer to this question. I have some DB's that are fine and close pinstripes and others that have wide chalks that are over 1 1/2" apart.

We're I to give guidance, I'd say that finer close stripes are more for business and wide chalks are more for fun. :wink:
DD MacDonald
Posts: 383
Joined: Mon Sep 19, 2005 1:51 pm
Contact:

Tue Aug 17, 2010 9:15 pm

Rowly wrote:
DD MacDonald wrote:If I were looking, I'd focus on the 5/8-3/4 inch range (between the stripes).
This is usually my feeling also , however, I really liked these cloths ( Lesser's 30882, and 13oz 29720)... I thought they were quite striking and might look good as db. I agree about not going too wide but wasn't sure about going narrower. I certaintly don't want to talk myself into another misfire. On the wide side, ... there is a lovely rich sporty blue flannel by Harrisons that I admire, and although probably intended for a very large chest.. I am tempted to have it in a sb.., as a jazzy fun suit..( Harrison 39190 ) ... How frustrating it is to find the ideal cloth, but the stripe to be on the wide side? Maybe I should, '' take a walk on the wide side " and broaden my perspective and not be too narrow with my options? .... thanks for all advice, which is helpful as always.... Rowly.

Rowly, err on the side of wider rather than narrower. I don't know the Harrison cloth, but have some fun. DDM
Rowly
Posts: 541
Joined: Thu Feb 26, 2009 2:42 pm
Contact:

Wed Aug 18, 2010 9:11 am

Thanks again for all the advice, Rowly
alden
Posts: 8210
Joined: Tue Jan 18, 2005 11:58 am
Contact:

Mon Aug 23, 2010 5:53 pm

I saw a DB made from the LL Reverse stripe recently and it was a cracker. Do we have any pictures to post of that one?

Michael
oldog/oldtrix
Posts: 58
Joined: Mon Apr 03, 2006 8:42 pm
Contact:

Tue Sep 28, 2010 6:13 pm

yachtie wrote:We're I to give guidance, I'd say that finer close stripes are more for business and wide chalks are more for fun. :wink:
I agree. Hence, I wore all of these for business (including court appearances):

Image

Image

Image

Image
Levi
Posts: 20
Joined: Wed Feb 03, 2010 5:56 am
Contact:

Tue Sep 28, 2010 6:40 pm

Excellent, Old Dog, especially the first two!
Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 22 guests