I thought I would start with some photos of a recent commission from Rubinacci. If this post with photos works, I will later post photos of a suit I recently had made at Caraceni, Rome. I wanted to try both establishments to see what style worked best for me.
The suit is 3-piece. The fabric is a light weight (probably too light, in retrospect) glen plaid with a gold check overtone (is that the correct way to describe it?). Here is a photo showing the fabric and the lining:
![Image](http://i1216.photobucket.com/albums/dd376/wcp45/0e8ba34a.jpg)
Here is a photograph of the pants:
![Image](http://i1216.photobucket.com/albums/dd376/wcp45/bae602f3.jpg)
A side-view:
![Image](http://i1216.photobucket.com/albums/dd376/wcp45/d4f84b3a.jpg)
Rear view:
![Image](http://i1216.photobucket.com/albums/dd376/wcp45/92d62e07.jpg)
With the vest:
![Image](http://i1216.photobucket.com/albums/dd376/wcp45/0351b831.jpg)
The suit jacket with vest, front view:
![Image](http://i1216.photobucket.com/albums/dd376/wcp45/d0c48cfc.jpg)
The suit with vest, side view:
![Image](http://i1216.photobucket.com/albums/dd376/wcp45/8b13b31f.jpg)
And the back view:
![Image](http://i1216.photobucket.com/albums/dd376/wcp45/aeecc6c7.jpg)
The shoulder, as expected, is much narrower than the Caraceni shoulder (which I will post later). Do you think the Rubinacci shoulder should be slightly extended? I have seen photos of Luca Rubinacci's suits, and they seem to have a slightly wider shoulder. My suit was made in Naples. I understand Luca's most recent ones are made in Milan. In any event, I welcome all comments.